An average fluid temperature to estimate borehole thermal resistance of ground heat exchanger

Analysis of borehole thermal resistance is important for the standard sizing of ground heat exchanger (GHE). In this paper, a p-linear dimensionless average fluid temperature is proposed to estimate borehole thermal resistance. A p-linear dimensionless fluid temperature and p-linear dimensionless average fluid temperature are introduced, and the p-linear dimensionless fluid temperature is compared with theoretical dimensionless fluid temperature calculated by quasi-three-dimensional model for both single and double U-tubes. Results show that the p-linear dimensionless temperatures with parameters p → 0 and p = ?1/2 are respectively in good agreement with the theoretical dimensionless fluid temperatures of single and double U-tubes. Therefore, the dimensionless logarithmic mean temperature for p → 0 and the dimensionless geometric mean temperature for p = ?1/2 should respectively be adopted to reasonably estimate the thermal resistance of single and double U-tube boreholes.     

Magnetic and magnetocaloric properties in melt-spun and annealed Ni42.7Mn40.8Co5.2Sn11.3 ribbons

The Ni_42.7Mn_40.8Co_5.2Sn_11.3 ribbons were prepared by melt spinning. After heat treatment, the martensitic transformation temperature and Curie temperature of austenite of the annealed ribbons increased remarkably. Inverse and direct magnetocaloric properties were investigated in the melt-spun and annealed ribbons. The effective refrigerant capacities for these ribbons were discussed in this paper.     

Thermal flow of fluid with magnetic particles in the presence of magnetic field

A magnetic fluid is a stable colloidal solution composed of magnetic particles, surfactant, and a carrier fluid. Magnetic fluids have numerous applications. In this study, we used the computational fluid dynamics model to simulate the behavior of a magnetic fluid in a 2-D square under different conditions such as different positions and intensities of the magnetic source. The preliminary model was established and used in conjunction with experimental data obtained from a present study, in order to determine the influence of particle size and mass fraction on fluid behavior. Our results show that particles with a smaller size have better ability to dissipate heat, and a larger mass fraction would provide a stronger driving force which leads to the velocity and temperature profile. We anticipate that our model would be useful to develop newer applications of magnetic fluids and magnetic flow.     

提高X荧光熔融分析铁矿石准确度的有效途径

根据多年的工作经验和试验结果,对铁矿石熔融分析的每一个环节进行了总结,对X荧光熔融分析铁矿石准确度的提高具有指导性意义。     

Lessons learned from studying public initiatives to support energy efficiency finance in Thailand from 1992 to 2014

Despite the huge technical and market potential for cost-effective energy efficiency investments in Southeast Asian markets, only a small fraction of this potential has been realised. Given that the major share of global future energy demand, and associated greenhouse gas emissions, will come from emerging economies, it is important to understand the barriers to mainstreaming energy efficiency into the financial sector. This paper focuses on public initiatives that support one of the main barriers: access to capital. The researchers chose Thailand as a case study because of the range of energy efficiency finance programmes that have been designed and implemented since the early 1990s. Interviews with 21 experts from government, the private sector and academia provided the core data for this research. The analysis employed a multi-level perspective and focused on the historical evolution of public support of energy efficiency finance in the country. We identified three distinct phases of public policy development over the past two decades. Despite an impressive variety of ambitious and creative programmes, the initiatives have not yet succeeded in integrating energy efficiency into the financial sector in a meaningful way. Some of the key lessons found are that (a) it is better to treat energy efficiency and renewable energy in separate financing initiatives, (b) governments find it challenging to design effective mechanisms to de-risk financial investments, and (c) international organisations play an important role in testing and facilitating the introduction of new financing approaches and mechanisms. In emerging economies, cost-effective implementation of energy efficiency measures is a promising alternative that can reduce the need for investment in large-scale power generation capacity. The researchers hope that this paper will contribute to more effective design of programmes to incentivise energy efficiency financing in Thailand and in other economies in Southeast Asia.     

Determination of 200 °C Isothermal Section of Al-Ag-Ga Phase Diagram by Microanalysis,X-ray Diffraction,Hardness and Electrical Conductivity Measurements

Ternary Al-Ag-Ga system at 200 °C was experimentally and thermodynamically assessed. Isothermal section was extrapolated using optimized thermodynamic parameters for constitutive binary systems. Microstructure and phase composition of the selected alloy samples were analyzed using light microscopy, scanning electron microscopy combined with energy-dispersive spectrometry and x-ray powder diffraction technique. The obtained experimental results were found to be in a close agreement with the predicted phase equilibria. Hardness and electrical conductivity of the alloy samples from four vertical sections Al-Ag₈₀Ga₂₀, Al-Ag₆₀Ga₄₀, Ag-Al₈₀Ga₂₀ and Ag-Al₆₀Ga₄₀ of the ternary Al-Ag-Ga system at 200 °C were experimentally determined using Brinell method and eddy current measurements. Additionally, hardness of the individual phases present in the microstructure of the studied alloy samples was determined using Vickers microhardness test. Based on experimentally obtained results, isolines of Brinell hardness and electrical conductivity were calculated for the alloys from isothermal section of the ternary Al-Ag-Ga system at 200 °C.     

Pasting,thermal, gel texture,resistant starch and colour properties of unripe banana flour from 10 desert banana varieties cultivated in South Africa

Unripe banana flour is a potential commercial ingredient in various food products for increased resistant starch and reduced gluten contents. In the present study, the pasting (rapid visco-analysis), gel texture (penetration test), thermal (differential scanning calorimetry), colour (tri-stimulus colour indices) and the resistant starch properties of unripe banana flour produced from different dessert banana varieties (n?=?10) cultivated in South Africa, were analysed and juxtaposed to wheat and maize flour. The functional properties varied significantly (p?≤?0.05) between banana varieties, and from wheat and maize flours, to various extents. Selected functional property ranges of unripe banana, wheat and maize flours, respectively included; flour colour index (63.16–76.42, 77.34 and 80.96), paste viscosity (405.5–556.6, 124.7 and 115.6 RVU), gelatinization temperature (64.67–71.21, 71.11 and 69.95?°C), gel firmness (7.24–11.44?×?10^??2 N, 3.49?×?10^??2 N and 6.56?×?10^??2 N) and resistant starch content (19.9–47.4, 2.8 and 2.2% w/w). Multivariate analysis (principle component analysis) showed that the unripe banana flours from different varieties were distinguished from each other based on the pasting temperature. The unripe banana flours were distinguished from both wheat and maize flour based on breakdown and peak paste viscosities. The breakdown viscosity was the most positively related measure to the resistant starch content with a linear regression R-squared value of 0.898, indicating a significant role played by granule structure in resistance to enzymatic hydrolysis. The present research demonstrates that selection of appropriate dessert banana variety is important when replacing staple flours (wheat and maize) with unripe dessert banana flour as a functional ingredient.     

Quantitative imaging of red blood cell velocity invivo using optical coherence Doppler tomography

We present particle counting ultrahigh-resolution optical Doppler tomography (pc-μODT) that enables accurate imaging of red blood cell velocities (ν(RBC)) of cerebrovascular networks by detecting the Doppler phase transients induced by the passage of a RBC through a capillary. We apply pc-μODT to image the response of capillary ν(RBC) to mild hypercapnia in mouse cortex. The results show that ν(RBC) in normocapnia (ν(N)?=?0.72?±?0.15?mm/s) increased 36.1%?±?5.3% (ν(H)?=?0.98?±?0.29?mm/s) in response to hypercapnia. Due to uncorrected angle effect and low hematocrit (e.g., ～10%), ν(RBC) directly measured by μODT were markedly underestimated (ν(N) ≈ 0.27?±?0.03?mm/s, ν(H) ≈ 0.37±?0.05?mm/s). Nevertheless, the measured ν(RBC) increase (35.3%) matched that (36.1%?±?5.3%) by pc-μODT.